用高分子复合材料修复轧管机组大型构件

介绍采用高分子复合材料修复用于钢管生产的轧管机组大型构件的方法。重点介绍机架轴承座孔的修复工艺流程 ,修复定位 ,技术操作要点及修复效果。     

基于80C51F005单片机数据采集系统设计

文章阐述了一种利用新型集成数据采集芯片C8051F005来设计数据采集系统的思路。相对于一般的设计方法，由于其集成度高，且采用了高性能的闪速／电擦除存储器技术，能灵活地对芯片进行编程，方便地解决了数据采集问题，大大降低了数据采集系统的开发时间和系统成本。     

表冷器设计计算的一种新方法

本文从分析盘管内、外侧换热系数着手，提出了表冷器一种新的热工计算方法。     

单壁碳纳米管的制备及生长特性研究

采用Fe/MgO作为催化剂 ,催化裂解CH4制备了较纯的单壁碳纳米管 ,用TEM和Raman对碳纳米管进行了表征 ,对不同生长温度下制备的碳纳米管Raman径向呼吸振动峰 (RBM)进行了分析 ,研究了生长温度对单壁碳纳米管生长特性和结构特性的影响     

Deposition and Properties of Superconducting MgB2 Thin Films

The recently discovered superconductor MgB₂ with T _c at 39 K has great potential in superconducting electronics. In this paper, we review the deposition techniques used for MgB₂ thin films in the light of a thermodynamic study of the Mg-B system with the calculation of phase diagrams (CALPHAD) modeling technique. This thermodynamic study identifies a growth window in the pressure–temperature phase diagram, in which the magnesium pressure is very high for likely in situ growth temperatures. A Hybrid Physical–Chemical Vapor Deposition (HPCVD) technique that successfully achieves such a high Mg pressure is shown to produce in situ epitaxial MgB₂ thin films with bulk superconducting properties.     

Physiology of spinal anaesthesia and practical suggestions for successful spinal anaesthesia

There are numerous physiological effects of spinal anaesthesia. This chapter focuses on the physiological effects that are of clinical relevance to the anaesthesiologist, and provides suggestions for successful management of this simple and popular technique. The mechanisms and clinical significance of spinal-anaesthesia-induced hypotension, bradycardia and cardiac arrest are reviewed. The increasing popularity of ambulatory spinal anaesthesia requires knowledge that long-acting local anaesthetics, such as bupivacaine, impair the ability to void far longer than short-acting local anaesthetics, such as lidocaine. The importance of thermoregulation during spinal anaesthesia, and the clinical consequences of spinal-anaesthesia-induced hypothermia are reviewed. Effects of spinal anaesthesia on ventilatory mechanics are also highlighted. Lastly, the sedative and minimum-alveolar-concentration-sparing effects of spinal anaesthesia are discussed to reinforce the need for the judicious use of sedation in the perioperative setting.     

油库防爆电气设备运行安全管理注意事项

分析了油库防爆电气设备运行中安全管理应注意的几个事项。     

计算机辅助维修性设计与分析中的版本管理

为了支持渐进的和探索武的维修性设计与分析过程，必须进行有效的版本管理。本文研究了维修性CAD框架中版本管理的设计方案以及实现过程。     

纯净钢生产技术及现状

本文简述了近年来国外主要炼钢厂生产纯净钢钢中杂质元素控制技术的发展，系统分析了钢中氧、碳、氮、硫、磷、氢等元素在钢中行为和降低杂质元素的措施。     

Microstructure and fatigue characteristics of direct chill cast and electromagnetic cast 2024 Al alloy ingots

The distinct advantages of the electromagnetic casting (EMC) process consist in the presence of stirring motions in the melt, which lead to significant grain size reduction in solidified ingot. Furthermore, surface and subsurface qualities are improved due to the absence of ingot mold. However, it is impossible to achieve the aforementioned advantages in conventional direct chill casting (DCC). In order to contrast the before and after heat treatments of the microstructural and mechanical characteristics of EMC and DCC 2024 aluminium alloys, optical microscopy, scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffractions (XRD), differential scanning calorimetry (DSC), etc. were carried out. Compared with the DCC ingot, the EMC ingot has better mechanical properties not only in the ascast condition but also in the as-aged condition. The DSC curves show that the EMC specimens have high enthalpy, i.e., the thermal kinetic energy to form precipitates during the aging treatment process. Despite heat treatments applied to the DCC ingot, it fails to attain the same mechanical properties as the EMC ingot. Moreover, considering the expernsive scalping operation for DCC ingots, the EMC technique, which offers a lower manufacturing cost, is one of the best manufacturing methods used in obtaining the ingots of wrought aluminum alloys.